Epoxy resin (EV) is lightweight and high-strength. Its relative density is between 1.5 and 2.0, only 1/4 to 1/5 that of carbon steel, yet its tensile strength is close to or even exceeds that of carbon steel, while its specific strength is comparable to high-grade alloy steel. Therefore, it is highly effective in applications such as aerospace, rockets, spacecraft, high-pressure vessels, and other products requiring weight reduction. Some epoxy resins can achieve tensile, flexural, and compressive strengths exceeding 400 MPa.
EV has excellent corrosion resistance.
It is a good corrosion-resistant material, exhibiting good resistance to the atmosphere, water, and generally high concentrations of acids, alkalis, salts, and various oils and solvents. It has been applied to various aspects of chemical corrosion protection and is replacing carbon steel, stainless steel, wood, and non-ferrous metals.
EV has good electrical properties.
It is an excellent insulating material used to manufacture insulators. It maintains good dielectric properties even at high frequencies. It has good microwave permeability and is widely used in radar radomes.
EV exhibits excellent thermal performance.
Its low thermal conductivity, ranging from 1.25 to 1.67 kJ/(m·h·K) at room temperature, is only 1/100 to 1/1000 that of metals, making it an excellent thermal insulation material. Under instantaneous ultra-high temperature conditions, it is an ideal thermal protection and ablation-resistant material, capable of protecting spacecraft from high-speed airflow at temperatures exceeding 2000°C.
EV offers good design flexibility.
① Various structural products can be flexibly designed to meet specific requirements, resulting in excellent overall product integrity.
② Materials can be selected to fully meet product performance needs, such as corrosion resistance, resistance to instantaneous high temperatures, high strength in a specific direction, and good dielectric properties.
EV demonstrates excellent anti-condensation properties.
At outdoor temperatures of 0°C, indoor temperatures of 23°C, and indoor relative humidity below 80%, condensation does not form on the inner surface of the material.
EV offers excellent processability.
① Molding processes can be flexibly selected based on the product's shape, technical requirements, application, and quantity.
② The process is simple and can be formed in one step, resulting in outstanding economic benefits. It is especially advantageous for products with complex shapes that are difficult to form in small quantities.
